General Information APG MPI-E/R Intrinsically Safe Magnetostrictive provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. The MPI-R’s large, buoyant, and robust float allows for use in harsh applications where fouling or buildup might otherwise be of concern. The MPI-E’s lighter weight design allows it to be used […]
Overview BAMO Mesures SAS: European manufacturer of sensors and instruments for the monitoring and analysis of liquids BAMO has expertise in: Analysis and measuring of fluids, pH, chlorine, conductivity water hardness, turbidity and dissolved oxygen Control and level measurement, flow, pressure and temperature Motorized valves and automatic valves Manufacturing and product development are conducted in accordance […]
Description Bamo MAXIMAT LW CX SDR Level On Line Leak Detector compact leak detectors are designed to detect leaks in double-walled piping with water-polluting liquids. When an electrically conductive liquid comes into contact with the detection sensor, the integrated electronics respond by interrupting the continuous output signal; This signal can be read out from the […]
Description Bamo MAXITOP LW C Level Leak Detector is designed to detect the presence of liquids (acids, alkalis) with a reactance below 5 kOhm and a coupling capacitance towards the ground of more than 50 pF. In no case should liquids form insulating or conductive deposits. Bamo MAXITOP LW C Features Capacitance detection loop For […]
Description Dinel PDU–420–W Programmable Display is equipped with one current input 0-20 / 4-20mA and one voltage input 0-5 / 1-5 / 0-10 / 2-10V. The current input has an additional overcurrent protection circuit, which protects the standard resistors. The selection of active input is realized by software, and selected input can be changed at […]
Dinel CDSU Level Control Relay are dual-channel unit designed to evaluate the states of the conductive probes. They include a power supply 5 V AC for supplying the probes. The DIP switches enable to selection a basic mode (an independent function of two limit sensors) or the level control mode between the maximum and minimum […]