Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
Description Hengstler ACURO AX71 Absolute Rotary Encoder with a stainless steel housing have been designed specifically for use in potentially explosive atmospheres. The pressure-resistant housing has been developed in compliance with the EN 60079 series of standards for use in explosive atmospheres and is permitted for use in environments where there is a risk of […]
Description Hengstler ACURO AX65 Absolute Rotary Encoder Certified explosion-proof, built with marine-grade stainless steel, with a shock rating of 200 G and shaft load of 300 N, the AX65 is one tough encoder. The most compact absolute encoder in its class, its shallow depth and body diameter of only 59 mm allow it to fit […]
Description Hengstler ACURO AR63 Absolute Rotary Encoder includes not only a robust housing but also large dimensioned, block-type ball bearings. Even high axial and radial forces acting in the axial plane of the shaft of this rotary encoder will not cause it to miss a beat. The AR63 will cope with extreme acceleration, marked changes […]
Description Omron E2EF Proximity Sensor with Stainless Housing use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models […]
Stainless Housing E2FM Proximity Sensor Omron Proximity Sensor use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. E2FM Omron Proximity Sensor are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal […]
Overview Bamo MNR 6 Magnetic Level Controllers has a Trigger point distances are determined prior to manufacture in relation to the sealing surface, in order to ensure the correct position of the contacts. The float can be removed from the bottom of the MNR6 controller (end stop ring removed). it is useful to order the […]
