J. Schneider AKKUTEC 2403

J. Schneider AKKUTEC 2403, The battery buffered DC power supply of the series AKKUTEC is working according the stand-by parallel mode and ensures in connection with a lead-acid accumulator a safe continuous DC power supply in case of mains failure. The back-up time is depending from the state of charge of the accumulator and of the discharge current.

J. Schneider AKKUTEC 2403 Features

  • Battery charger with I/U-charging characteristics
  • Battery management by micro-controller
  • Battery voltage tracking of the charging voltage by external sensor module (optional)

Related Articles :

J. Schneider AKKUTEC 2403 Technical Data

Nominal input voltage 230 V AC +15% -10%
Nominal frequency 47 … 63, Hz
Max. nominal input current 0,7 A
Max. charging current 0,25 A
Nominal output voltage 24 V DC
Output voltage range (with temp.-sensor) 19,8 V DC … 27,8 V DC
Output voltage range (without temp.-sensor) 19,8 V DC … 26,8 V DC
Max. nominal output current 2,85 A DC
Charge end voltage with temp.-sensor @ 25° 27,1 V DC ± 0,4%
Charge end voltage without temp.-sensor 26,8 V DC ± 0,4%
Efficiency 87 %
Battery type Pb-Akku, maintenance-free

Pb- Akku maintenance-free (Option with changed characteristic)

Buffer time Depending on battery and load
Degree of protection IP 20
Operating temperature 0 … 40 °C
Storage temperature 0 … 50°C
Relative humidity
Max. altitude (without derating)
Dimensions (H x W X D) 92,5 mm x  60 mm x 116 mm
Weight 0,55 kg
Fixation Snap-on mounting for DIN top hat rail
Norms and Regulations EN 50178 / EN 60950
UL approvals No

Reference : j-schneider.de

Download : Datasheet

Share
%d bloggers like this: