Feature
- [CUBEGM Seires] is an all-in-one unit that has a mass flow controller, control power supply, valve, check valve and gas mixer.
- Simply connect the piping to the INside and OUTside.
- [CUBEGM Series] is a device that supplies a mixed gas species of 2, 3, 4 to set up and control to any of the flow rates.
- Analog mass flow controller [1000 Series] is mounted as a standard feature.
- The mass flow controller, which flow control range is from 10SCCM to 50SLM, can be mounted as a standard. In other cases, please contact us.
- It can be reduced the cost when you use a Gas mixer than you purchase gas cylinders that have been prepared in the mixing ratio.
- It can be used for a wide range of applications such as analysis, environment, bio, packaging, medical, gas welding.
- Applicable gases: Inert gas. (For more information, please contact us)
Specification
| Size | CUBEGM2 : W315×D298×H250(mm) ?Except protrusion CUBEGM3 : W415×D298×H250(mm) ?Except protrusion CUBEGM4 : W515×D298×H250(mm) ?Except protrusion |
| Built-in MFC | MFC1000 or FCST1000L (manufactured by Fujikin) |
| Gases | Most gases (e.g., air, nitrogen, carbon dioxide, argon, hydrogen, helium, methane, oxygen) |
| Current consumption | MAX 1A ?In the case of 4 mass flow controllers equipped with |
| Flow range* | 10SCCM to 20SLM for one line (but the mixed gas flow of 50SLM or less) |
| Flow rate control | MFC : C1000 Series or FCST1000L Series |
| Flow rate output signals | 0-5VDC |
| Flow rate control range | 1 LINE: F.S.10SCCM?20SLM (However, the mixed gas flow rate must be less than 50 SLM) |
| Operating differential pressure | Conform to built-in mass flow controller specification |
| Pressure Resistance | Conform to built-in mass flow controller specification |
| Operating environment | 5-50°C (Accuracy guaranteed between 15-35°C), 30-80% RH (No condensation permitted) |
| Leak Integrity | 1×10-7Pa?m3/sec (He) |
| Wetted surface material | SUS316, PTFE, Fluoro-Rubber and built-in mass flow controller material (FCST1000L Series: Magnetic stainless steel, Fluoro-Rubber or Chloroprene rubber) |
| Standard Fitting** | 1/4in. SWL (equivalent), One-touch fittings |
| Inlet and outlet valves | Ball valve |
| Mass flow control | 10-turn potentiometer |
| Display | Instantaneous flow: 4 digits |
| Input power | AC85-264V |
| Accessory | AC cable(2m), User’s manual, Written guarantee |
- At FCON, flow rates (SCCM, SLM) are converted to values at 0ºC, 101.3kPa abs (1atm) for calibration. Please contact us regarding detailed specifications for the gas type and flow range.
** For other fittings, please contact us.
May be changed items depending on the number of mass flow controllers. The other specifications, please contact us.
Data Sheet: Fcon CUBEGM Gas Mixer
Reference: www.fcon-inc.jp
Read Another Article:
- The Technology of Ultrasonic Flowmeter
- Working Principle of Flow Meter
- How to Choose a Flow Meter
- Models and Types of Flow Meter
- Sound Velocity of Material
- Principle Working of Coriolis Mass Flow Meter
