Safety is the highest priority in the installation sector. This also applies to your own working methods and the required light. AccuLux SL 6 LED lamps, you have a bright view whether as a work lamp or a hand lamp. Explosion-proofed lamps are available in a variety of models and for the explosion zones 0, 1, 2, 10, 21, and 22.
AccuLux SL 6 LED for Electrical Work
Our advantages for electrical work:
- Compact, lightweight, and bright.
- Robust and impact-resistant.
- Explosion and non-explosion proofed lamps.
SL 6 LED Set for Electrical Work
The case of the dust and splash-water protected safety lamp model AccuLux SL 6 LED is made of robust plastic. The lens optic of the power LED generates a strongly focussed light beam with a high range. A replacement of the LED lamp is not required. Through the 110° flexible lamp head and the included orange viewing pane, the lamp is flexible and can be used, for example, as a blinking warning lamp.
The rechargeable, maintenance-free lead gel battery without memory effect is secured against deep discharge and can be permanently charged through the intelligent circuit layout. An automatic switch function from the power LED to the LED pilot lamps also integrated. The lamp has a remaining capacity display through four LEDs installed on the back. The charge state is signaled through the blinking of the pilot lamp.
The charging station L 5 with optimized charging technology in minimal dimensions guarantees assembly possibilities for the smallest spots in cars or buildings. The AccuLux SL 6 LED can be charged on 230 V AC as well as 24 V and 12 V DC. Safety emergency light function is present.
- dust and splash water protected
- focussed light beam with a high range
- robust plastic casing
- flexible lamp head
- extremely lightweight, ergonomic design
- Emergency light function turns on in the event of a power failure
- automatic switch function from the power LED to the LED pilot lamp (with weak rechargeable battery)
- 4-stage charge level display
- high-quality, maintenance-free led gel battery
Specifications | Technical data
| Article no. | 456541 |
| Case material | Plastic |
| Lamp main lamp | Power LED (approx. 180 lumen) |
| Operating time main lamp | approx. 5 h |
| Operating time blink mode | approx. 10 h |
| The lifespan of the LED | approx. 50.000 h |
| Protection class of the lamp | IP 54 |
| Range | approx. 170 m* |
| Lamp pilot lamp | LED 5 mm |
| Operating time pilot lamp | approx. 75 h |
| Rechargeable | Led gel rechargeable battery, main |
| Charging voltage | 230 V AC 50 / 60Hz, 12 / 24 V DC |
| Protection class | II |
| Laser class | 1 |
| Weight of the lamp | 1100 g |
| Dimensions in mm (set) | 104 x 245 x 120 |
*Luminous flux (lumen) or maximum range (meter) measured when turning on with a set of new batteries. These are average values that may deviate by +/- 10% due to component tolerances.
Download Datasheet: AccuLux SL 6 LED Set for Electrical Work
Reference: acculux.eu
other Article:
- Acculux Multi LED and PowerLux LED for Electrical Work
- Acculux JobLux 90 LED Focus for Electrical Work
- AccuLux SL 8 LED Set for Hazardous Areas
- Acculux HL 25 EX for Vechile Equipment
- Acculux EX SLE 16 LED Set for Vehicle Equipment