Descriptions
The DC-UPS of the AC C–TEC 2403 series is equipped with an integrated power supply and ultracapacitors for accumulating energy. During normal operation, this capacitor is charged by an internal charger which is supplied by the internal, regulated DC power supply. If the AC supply is interrupted, the energy of the ultracapacitors is released in a regulated process (24 V DC ±2%). The load is supplied by the buffer module until the capacitors are discharged. The buffering time depends on the state of charge of the capacitor and discharging current.
The DC-UPS shows the following features:
The DC-buffer module C-TEC works with Ultra-capacitors as energy storage inside the housing. In case of an interruption of the DC supply, the energy of the Ultracapacitors is released. The load is energized from the buffer module until it is discharged. The backup time depends on the state of charge of the capacitors and on the discharge current.
- Maintenance-free due to durable ultra capacitors
- reduces wiring time due to integrated energy storage and power supply
- Microcontroller based charging and discharging of the ultracapacitors
- Input voltage-signal via potential-free contact and LED
- Short overload possible
- Vibration secured wiring via spring loaded plugs
- Wide working temperature range -40°C till 60°C
J. Schneider AC C-TEC 2403-1-400 Technical Data
| Nominal input voltage | 400 V ± 15 % |
| Min. nominal input voltage for charging mode | |
| Nominal frequency | |
| Max. nominal input current | 0,24 A |
| Max. charging current | |
| Nominal output voltage (mains operation) | 24,3 V DC ± 2 % |
| Nominal output voltage (buffer operation) | 23,5 V DC ± 2 % |
| Max. nominal output current | 2 A DC (with nominal capacity) 3 A DC (with reduced capacity) |
| Efficiency | 88 % |
| Energy content | 1 kJ |
| Buffer time | Depending on load |
| Degree of protection | IP20 |
| Operating temperature | -20 … 60 °C |
| Storage temperature | -20 … 60 °C |
| Relative humidity | 95 % non-condensing |
| Max. altitude (without derating) | 2000 m above sealevel |
| Dimensions (H x W x D) | 152,5 mm x 100 mm x 130 mm |
| Weight | 1,2 kg |
| Fixation | Snap-on mounting for DIN top hat rail |
| Norms and Regulations | EN 50178 EN 60950 |
| UL approvals | No |
Reference : j-schneider.de
Download : Datasheet
Another Articles :
- J. Schneider C-TEC 2440-4 P
- J. Schneider C-TEC 2425 P
- J. Schneider AC C-TEC 1203-05
- J. Schneider C-TEC 4815 P
- J. Schneider C-TEC 1225 P