J. Schneider AKKUTEC 2403 19" power supply - Indonesia Industrial Parts

Description

J. Schneider AKKUTEC 2403 19″, The battery buffered DC power supply of the series AKKUTEC is working according the stand-by parallel mode and ensures in connection with a lead-acid accumulator a safe continuous DC power supply in case of mains failure.
The back-up time is depending from the state of charge of the accumulator and of the discharge current.

The power supply has the following features:

Battery charger with I/U-charging characteristics
Battery management by micro-controller
Battery voltage tracking of the charging voltage by external sensor module (optional)

J. Schneider AKKUTEC 2403 19″ Technical Data

Nominal input voltage	230 V AC ± 15 %
Nominal frequency	47 … 63 Hz
Max. nominal input current	0,7 A
Max. charging current	0,25 A
Nominal output voltage	24 V DC
Output voltage range (with temp.-sensor)	19,8 V DC … 27,8 V DC
Output voltage range (without temp.-sensor)	19,8 V DC … 26,8 V DC
Max. nominal output current	2,85 A DC
Charge end voltage with temp.-sensor @ 25°	27,1 V DC ± 0,4%
Charge end voltage without temp.-sensor	26,8 V DC ± 0,4%
Efficiency	87 %
Battery type	Pb-Akku, maintenance-free Pb- Akku maintenance-free (Option with changed characteristic)
Buffer time	Depending on battery and load
Degree of protection	IP 20
Operating temperature	0 … 40 °C
Storage temperature	0 … 50°C
Relative humidity
Max. altitude (without derating)
Dimensions (H x W X D)	132,5 x 465,9 x 244 mm
Weight
AKKUTEC 19″-2403-07	7,0 kg
AKKUTEC 19″-2403-12	9,6 kg
Norms and Regulations	EN 50178 / EN 60950
UL approvals	No