General Information
J. Schneider CEM 24-1, Capacitor Extension Module. The CEM module is used to increase the buffer energy for the devices C–TEC 2403-05; 2403-1; 2420-8 and 2440P as well as for the devices AC C–TEC 2403-05; AC C–TEC 2403-1; AC C–TEC 2403-1-400; AC C–TEC 2420-8. The C–TEC monitors and controls the charging and discharging of the extension modules.
J. Schneider CEM 24-1 Technical Data
Nominal input voltage | 24 V DC |
Input voltage range | 0 … 26,4 V DC 0… 24 V DC +10% |
Buffer capacity | 1 kJ |
Nominal input current | 3 A DC |
Nominal output current | 3 A DC |
Fusing input | 3 A T (PCT internal) |
Fusing DC output circuit | 3 A T (PCT internal) |
Type of connection input ,C+/C+’ | Spring terminal max. 1,0mm² |
Type of connection output ,C+/C+’ | Spring terminal max. 1,0mm² |
Protective system | IP20 and EN60529 |
Storage temperature | – 40 … 60 °C |
Environmental temperature | – 40 … 60 °C |
Relative humidity | 95 % non-condensing |
Max. mounting height (without load reduction) | 2000 m above sealevel |
Dimensions (H x W x D) | 92,5 mm x 60 mm x 116 mm |
Weight | 0,52 kg |
Fixation | Snap-on mounting for DIN top hat rail |
Norms and Regulations | EN 50178 / EN 60950 |
UL approvals | UL 508 C22.2 |
Reference : j-schneider.de
Download : Datasheet
Other Article:
- J. Schneider C-TEC 2440-4 P
- Kracht DT 5 Duo Tec Series – Gear Pump
- J. Schneider NBBH 2401
- J. Schneider C-TEC 1203
- J. Schneider C-TEC 1225 P
- J. Schneider C-TEC 2403 USB
- Kracht KP 1 Duo Tec – Gear Pump Series
- J. Schneider C-TEC 2403-1of
- J. Schneider C-TEC 4815 P
- J. Schneider AC C-TEC 2403-1-400