West Control Solutions KS 92-1 Single Loop Process Controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature, temperature-dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications:
- Furnaces and ovens
- Burners and boilers
- Plastics processing
- Driers
Benefits & Features KS 92-1 Single Loop Process Controller
- BluePort®
- Front interface and BlueControl software
- Maintenance manager and error list
- Two universal inputs
- Day & Night display shows plain text and bargraphs
- Manual gain scheduling
- Self-Tuning to the setpoint without oscillation
- Valve controller with position feedback and DAC monitoring
- 3-point controller for water, fan, and oil cooling
- Type tested to EN 14597 (replaces DIN 3440) and cULus
- High-impedance mV input for O2 sensors
- Two switchable parameter sets
Specification KS 92-1 Single Loop Process Controller
| Product Category: | Single Loop controller |
| Dimensions and size: | 96m x 96mm x 118mm (HxWxD), 1/4 DIN |
| Connectors: | Pin or screw terminals |
| Primary Input Type: | Universal (TC, RTD, DC linear mA/mV) |
| Other Inputs: | External setpoint, Ratio input, Potentiometer input, Heating current monitoring |
| Output Type: | Relay, Logic, Linear mA/VDC, Optocoupler |
| Max. Number of Outputs: | 6 |
| Scan Time: | 100 ms |
| Number of Programmer Segments: | 16 Program x 16 Segments |
| Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
| Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
| Communications: | RS422 & RS485 Modbus, Profibus-DP |
| Panel Sealing: | IP65 |
| Certifications: | CE, cULus, DIN EN 14597 |
| Software Tools: | Blue Control |
Source: www.west-cs.co.uk
Read More Articles :
- Kobold Display, Indicator, and Control
- Pulsar Software
- Pulsar Pump Controllers
- Hengesbach DSA 1010 Digital Display
- Kobold DFT Rotating Vane Flow Meter