APG FT-100/FT-300 Cable Float Switch are single point level sensors that switch ON or OFF at one level. They work well as alarm point indicators. The switch operating levels are easily adjustable, and the floats are designed for use in clean water and sewage applications. Inexpensive repeatability. This inexpensive, traditional single point switch is ideal for simple alarming applications.
The sensors trigger immediately above or below horizontal, for a highly repeatable performance that you can count on. This traditional float switch is inexpensive, effective, and ideal for simple alarm applications.
APG FT-100/FT-300 Cable Float Switch Features
- Highly chemical resistant
- Proven reliability in operation
- Not sensitive to rotation
Inexpensive Float Switch
FT-100 and FT-300 Series cable float switches give value with high quality at a low cost. If budget is your primary concern, an FT-100 or FT-300 can give you effective single point alarming and control with a small price tag.
These water level sensors are built with consistency in mind. They trigger immediately above or below horizontal, for a highly repeatable performance that you can count on.
Multiple Switching Options
The FT-100 can be purchased as NO, NC, or SPDT switch connection. The FT-300 is available as NO or NC.
APG FT-100/FT-300 Cable Float Switch Specification
|Control Differential||FT-100: 1.5 in. above or below horizontal|
|FT-300: 4.0 in. above or below horizontal|
|Switching Capacity||FT-100: 5 A, 125/250 VAC|
|FT-300: 0.160 – 100 mA, 125VAC / 30 VDC|
|FT-300: 1 mA, 5 VDC|
|Switch Outputs||FT-100: NO/NC, SPDT|
|Housing||High impact, corrosion resistant polypropylene|
|Cable Lengths||6m (20 ft.) Standard|
|Other lengths available in 5 ft. increments|
|Certifications||CSA General Purpose|
|CPE (water resistant)|
|Max. Liquid Temperature||140° F (60° C)|
Download Data Sheet: Cable Float Switch FT-100/FT-300