Hengesbach NM Level Module is used to evaluate single levels in the conductive level probes. It is directly installed into the connection head of the level probes. Level indication “full” is generated by contact of the probe with the conducting medium between probe and ground (metal connection), resulting in a conducting circuit, converted in a DC-switch signal. Level indication “empty” is generated when the probe is not covered any more by the medium.
This signal can be directly evaluated and processed by a PLC-system. The direct mounting of the modules in the connection head means cost reduction because of easy electrical installation and mounting as well as excellent EMC performance. Therefore additional devices for cabinet assemblies are not necessary.
Hengesbach NM Level Module Features:
- for installation in level probes NKS
- connection with PLC possible
- sensitivity adjustable
0,1 K?….100 K? - low installation costs
Hengesbach NM Level Module Specification:
| Housing | plastics | ? 43,5 x 10,7 mm |
| Temperature | ambient temp. | -10…+60 °C |
| operational temp. | -10…+60 °C | |
| storage temp. | -20…+60 °C | |
| rel. humidity | 0…95 % without dew | |
| Input | electrode | max. volt. 1 V AC/ 6kHz |
| Sensitivity | 4 steps adjustable | 0,1k?, 1k?, 10k?, 100k? |
| Output | active output | 16…36 V DC – 2 V regarding |
| power supply, 0,05 A short- | ||
| switch output | circuit proof transistor output | |
| Function | full/empty signal | selectable |
| Time delay | fixed | 0,5 s |
| Power supply | 16…36 V DC | |
| ELECTRICAL CONNECTION | ||
| Cable gland | 1 = | GND (sensor) |
| 2 = | electrode (sensor) | |
| 3 = | active output | |
| 4 = | plus-Voltage supply | |
| 5 = | mInus-Voltage supply | |
| M12-round socket | 1 = | + |
| 3 = | – | |
| 4 = | active output | |
| GND and Minus voltage supply are connected. | ||
| CE-conformance: acc. to EMC-guidelines | ||
Download Data Sheet: Level Module for Installation in Level Probes Type NM
Ref: hengesbach.com
Another Article:
- TE Connectivty – HK, HWK Series Power Signal Connector
- Bamo BS – BC Conductivity and Resistivity Probes
- Hach DR1900 Portable Spectrophotometer
- Hach DR3900 Laboratory Spectrophotometer for Water Analysis
- Bamo Cable Suspended Resistive Level Probes