APG Industrial Pressure Transducer PT-200

The APG Pressure Transducer  PT-200 0.5% Industrial Pressure Transmitters are rugged, general-purpose sensors that offer reliable and accurate measurements under harsh conditions. The sensor fitting is machined from a solid piece of 17-4PH SS to provide stable operation when subjected to shock and vibration. APG Pressure Transducer  PT-200s also incorporate digital compensation and temperature correction for high accuracy and stability.

High performance at a low cost. The APG Pressure Transducer  PT-200 series are rugged, general-purpose sensors that offer reliable and accurate measurements under harsh conditions. Series PT-200 0.5% Industrial Pressure Transmitters are rugged, general-purpose sensors that offer reliable and accurate measurements under harsh conditions.

The sensor fitting is machined from a solid piece of 17-4 SS to provide stable operation when subjected to shock and vibration. APG Pressure Transducer  PT-200s also incorporate digital compensation and temperature correction for high accuracy and stability.

Low Cost

These pressure transducers are inexpensive and great for a wide variety of uses, including OEM applications.

Rugged Build

With 17-4 SS bodies, these pressure sensors are built for endurance with high chemical compatibility and solid construction.

Compact Design

Series PT-200 pressure transducers are built with our most compact enclosure to fit your needs better.

Features

  • Cost-effective
  • High overpressure capability
  • Single piece stainless steel process fitting and sensor
  • Choice of three common electrical connections

Another Article:

Specification

Performance
Pressure Range Up to 10,000 psi
Accuracy B.F.S.L. ≤ 0.5% of full scale
Stability – Thermal Shift
Zero: ± 0.01% FSO/°C (± 0.02% FSO/°F)
Span: ± 0.02% FSO/°C (± 0.04% FSO/°F)
Stability – Long Term
± 0.5% FSO/year
Electrical
Supply Voltage 9-32 VDC
Current Draw less than 30 mA
Output Impedance less than 100Ω
Electrical Connection 3-Pin Packard Connector
M12 Connector
3-Wire Shielded Cable (60 cm / 1.97 ft.)
Environmental
Operating Temperature -10 to 100° C (14 to 212° F)
Compensated Temperature 0 to 85° C (32 to 185° F)
Storage Temperature -20 to 125° C (-4 to 257° F)
Enclosure Rating IP65

Download Data Sheet: Industrial Pressure Transducer PT-200

Ref: apgsensors.com

Share
%d bloggers like this: