Description Bamo ES 2001 Resistive Level Controller is used as a limit value detector on conductive liquids; Probes and rods are chosen according to the application. Detection sensitivity to different type of liquids is set through the built-in potentiometer from 1 to 150 k?. The hysteresis between on/off switching of output relay is about 20% […]
Description Bamo SNR 4 Level Controller rising in the tube (open at the bottom), make the pressure increasing inside the measuring tube. The pressure variation acts on a diaphragm that directly activates a contact. The level controller SNR 4, affords a dirt liquid as far as this one does not clog the measuring tube. Thresholds […]
Description Bamo VAFLO Level Controller regulates automatically, the high level of water, without power supply. The system is simply mechanical: When the level rises, the float causes the closure of the water inlet nozzle. The level adjustment is possible within 120 mm when mounting the system. This level controller with stop valve VAFLO there is […]
Description Bamo NIVOMAG Magnetic Float Level Switch is a compact 316 stainless steel switch. Measurement principle : a noncontact coupling system is realized by the permanent magnet of the float placed in the tank that can activate the microswitch situated in the housing mounted on the outside. Therefore, the unit does not require external power. […]
Description Bamo NIVOSTOP Float Level Detector operating principle is the same as for other float level detectors NIVOSTOP® with a built-in counterweight. With the rising level, float tilts and actuates a switch (the output cable has to be connect to a control cabinet). The built-in counterweight allows the float not rising up to the surface […]