level controlIndonesia Industrial Parts

Bamo STS Resistive Level Probes with a relay ES 2001, detects a level of a conductive liquid. The longest electrode is used as the reference. The electrical contact occurs when the reference electrode and another electrode are both in contact with the liquid. Then, …

By Inaparts Author

16/09/202020/06/2025

Level Measurement

Bamo EF/EFC Level Electrodes for Wells

Description

Bamo EF/EFC Level Electrodes for Wells is sent into a so-called reference electrode. When the liquid is in contact with the reference and the level electrode (trigger point), the current passes through the conductive liquid. This short circuit is detected by a relay ES …

By Inaparts Author

16/09/202020/06/2025

Level Measurement

Bamo Cable Suspended Resistive Level Probes

Description

Bamo Cable Suspended Resistive Level Probes in open tank by electrodes, for instance acid storage tanks, barrage, waste water treatment plant, etc. The length of electrode cables is factory adjusted. The electrical resistance variation when the fluid touches the level electrode and the reference …

By Inaparts Author

16/09/202017/06/2025

Sensor

Bamo BES 680 Floor Leak Detection

DESCRIPTION

Bamo BES 680 Floor Leak Detection with the resistive level detector, associated to a resistive relay, detects the variation of resistor value caused by the presence of a conductive liquid between two electrodes. This variation generates an alarm signal via a resistive relay. With …

By Inaparts Author

16/09/202016/06/2025

Level Measurement

Bamo STE Resistive Level Probe

Bamo STE Resistive Level Probe in combination with a relay ES2001 detect the level of electrically conductive liquids. According to the model, up to 5 levels may be triggered (using the tank as the reference electrode) Provide a reference electrode if the tank is made …

By Inaparts Author

16/09/202021/02/2024

Measurement

Bamo RXM 2851 Resistive Level Detector

Overview

Bamo RXM 2851 Resistive Level Detector detects the difference of resistance between the detection electrode and the reference electrode when the liquid comes into contact.

The reference can be the wall of the metal container or a second electrode. A DC voltage of 12V …

By Inaparts Author

16/09/202025/10/2024