Description
J. Schneider AC C-TEC 2410-10, Ultracapacitor buffered Power Supply. The DC-UPS of the series AC C-TEC 2410-10 includes ultra-capacitors as energy storage inside the housing. During normal operation the capacitors are charged from an internal charger, which is supplied by an internal, regulated AC-DC power supply. In case of an interruption of the AC supply, the energy of the ultra-capacitors is released regulated (23,5 V DC ± 5%).
The load is supplied by the back-up module up to the ultra-capacitors are discharged. The back-up time depends on the state of charge of the capacitors and on the discharge current
The DC-UPS has the following characteristics:
- Maintenance-free because of long-life ultra-capacitors
- Microcontroller based charging and discharging of the ultra-capacitors
- Parameterizable via USB interface
- Control of operation and status of charge with potential-free contacts and LED
- Big temperature range -20 C up to 50 C
J. Schneider AC C-TEC 2410-10 Technical Data
| Input voltage range | 100 V – 240 V AC100 V – 230 V DC |
| nominal frequency | 50 Hz … 60 Hz ± 6 % |
| Max. nominal input current | 1,11 A @ 230 V AC 2,35 A @ 110 V AC |
| Max. inrush current | 1,76 A |
| nominal Output current (in mains operation) | 24,1 V DC ± 2 % |
| Output current range (in buffer operation) | 23,5 V DC ± 5 % |
| Max. nominal Output current | 10 A DC |
| efficiency | > 90 % |
| energy | 10 kJ |
| back-up time | 400 sec @ 1 A 42 sec @ 10 A |
| protective system | IP20 |
| operational temperature | -20 … 50 °C |
| storage temperature | -20 … 60 °C |
| Relative humidity | 95 % non condensating |
| Max. mounting heigth (without derating) | 2000 m above sealevel |
| dimensions (H x W x D) | 163 mm x 189 mm x 138mm |
| weight | ca. 3,0 kg |
| Fixation | Snap-on mounting for DIN top hat rail |
| Norms and Regulations | EN 50178 |
| UL-registration | No |
Reference : j-schneider.de
Download : Datasheet
Other Articles :