Bamo CAPSYTRON TLS Level Dry Run Protection is designed for empty tube detection. It avoids hammer effects when filling a tank. It is designed to detect the presence of liquids whose reactance is <5 kOhm, or even whose coupling capacity to earth is >50 pF. In no case should liquids form insulating or conductive deposits.
Bamo CAPSYTRON TLS Level Dry Run Protection Features
- Wet parts in plastic materials
- Compact probe
- Plug for function test
- Switches when pipe is empty
- No moving parts
Application
- Protection against dry run; Detection of empty filling pipe
- Prevents hammer effects when air is compressed in the pipe.
Bamo CAPSYTRON TLS Level Dry Run Protection Specification
Power supply | 15 … 27 V DC |
Consumption | < 1 W |
Output | Potential free Reed contact |
N.C. with liquid; N.O. without liquid (in air) | |
Rated: Max. 50 V AC / DC; Max. 0.5 A; Max. 10 VA for PLC | |
connection or coupling relay | |
Connector | Screw terminals, IP 20, cable Max. 2.5 mm² |
Additional function | Connection to an external test button, with which the whole |
electronics, wiring and signaling device can be tested. | |
Probe | Or PE, or PP |
Length | Min. 95 mm |
Fitting | Union nut BSP 1”, includes EPDM o-ring |
Ambient temperature | -20 … +60 °C |
Pressure limit | 2 bar |
Housing terminal | PBT, IP 65 acc. EN 60529 |
Download Data Sheet: Level Dry Run Protection CAPSYTRON TLS
Ref: bamo.eu
Another Article:
- Bamo Level Relays for Maximat and Capsytron CST / KRC
- APG TLS Series Cable Suspended Float Switch
- Flux Centrifugal Immersion Pumps F 726
- Flux Centrifugal Immersion Pumps F 716
- Flux Pump Kits For 99,98 % Drum Emptying