Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M

Description of Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M

Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M is a reliable and accurate tool for measuring water depth in various locations such as wells, boreholes, and tanks. The P7 variant of this tool comes with features that make measuring easier, such as a pressure-resistant probe, accurately sized tape, and ergonomic design. The P7 model, for example, utilizes a pressure-resistant probe up to 500 psi and a highly durable PVDF tape, making it ideal for extreme depth measurements.

The reel design on the Model 101 Water Level Gauge is designed for user convenience. It has a comfortable grip, a sturdy probe holder, and features such as switches, lights, and buzzers. The measuring tape used is also high-quality, non-stretchable, and durable. Model P7 is designed to provide accurate and consistent measurement results.

With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake, and a tape guide stored on the frame.

Features of Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M

Accurate

• Markings each 1/100 ft. or millimeter
• Traceable to national standards
• Sensitivity adjustable to conductivity
• Probes avoid false readings in cascading water

Reliable

• Permanent laser markings
• Non-stretch PVDF flat tape with stainless steel conductors

Long Life

• Rugged, corrosion-proof components
• Strong, flexible tapes
• Easy to splice and repair

Flexible

• PVDF replacement tapes are interchangeable with other meters

Specification of Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M

Operating Principles of Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M

Model 101 Water Level Meters use corrosion-proof stainless steel probes attached to a permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery. The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole. A sensitivity control allows the buzzer to be turned off while in cascading water and ensures a clear signal in both high and low conductivity conditions.

P7 Probe

The P7 Probe is submersible the full length of the tape, therefore, you can measure total well depth in ideal conditions. The sensor at the tip of the probe provides consistent measurements with almost zero displacement. The tape seal plug design allows the probe to be quickly and easily replaced if required.

PVDF Laser Marked Tape

The Model 101 P7 Water Level Meter uses extremely durable, PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency. The tape has a thick dog bone design that prevents adherence to wet surfaces and allows it to hang straight in application. It is also easy to splice. The 3/8″ (10 mm) tape comes with permanent laser markings every 1/100 ft. or each millimeter, in lengths up to 5000 ft. (1500 m).

For More Information and Price: Solinst Water Level 101 Water Level Meter, P7/ LM3/ 100M

Read More Articles:

• Microsensor Corp MPM4809TD Level Transmitter
• Microsensorcorp MPM489WZ4 Submersible Level Transmitter
• Microsensor Corp MPM426W Level Transmitter
• Microsensorcorp MPM416W Submersible Level Transmitter
• Microsensorcorp MPM416WRK Submersible Level Transmitter