CS Instruments Standard Pressure Sensor CS 40Indonesia Industrial Parts

Descriptions of CS Instruments Standard Pressure Sensor CS 40

CS Instruments Standard Pressure Sensor CS 40 0…40 bar measures with an accuracy of full scale 1%. For more exact measurements in the same pressure ratio, we offer the CS 40 sensor with an accuracy of the full scale of 0,5%.

Features

Standard pressure sensor CS 400 for pressure ratio 0…400 bar measures with accuracy of full scale 0,5%.
Output signal: 4…20 mA, 2-Wire
Power supply: 8…30 VDC

Specifications

Wetted parts: 316L
Housing: 316L
Non-linearity: 0,5 BFSL
Parameter: bar
Type of pressure:: relative, absolute, vacuum
Measuring range: 0…16 bar, 32 bar overpressure limit
Process connections: G 1/4A according to DIN 3852-E
Sealing: NBR
Permissible temperature: 0…+80 °C
Output signal: 4…20 mA, 2-Leiter
Power supply: 8…30 VDC
Accuracy at room temperature: < ±1 % of span (optionally < ±0,5 % of span)
Electrical connection: Angular connector DIN EN 175301-803 A, ingress protection IP 65,
wire cross-section up to max. 1.5 mm², cable diameter: 6…8 mm

Technical Data

Wetted parts: 316L
Housing: 316L
Non-linearity: 0,5 BFSL
Parameter: bar
Type of pressure:: relative, absolute, vacuum
Measuring range: 0…16 bar, 32 bar overpressure limit
Process connections: G 1/4A according to DIN 3852-E
Sealing: NBR
Permissible temperature: 0…+80 °C
Output signal: 4…20 mA, 2-Leiter
Power supply: 8…30 VDC
Accuracy at room temperature: < ±1 % of span (optionally < ±0,5 % of span)
Electrical connection: Angular connector DIN EN 175301-803 A, ingress protection IP 65, wire cross-section up to max. 1.5 mm², cable diameter: 6…8 mm max. 50 Nm