Hengesbach K Conductivity Transmitter Condutec is used for the measurement of conductivity or concentration in liquids, e.g. in CIP lines or other processes in the beverage industry. High accuracy and resistance against contamination of the electrode are achieved by using 4 electrode conductivity cells.
The instrument can be operated directly and is user-friendly at the graphic display. The switching output can be freely programmed; the Condutec is available either as a compact unit or split version (for strong vibrations or significant heat radiations).
The conductivity transmitter Condutec Kis is used for the measurement of conductivity or concentration in liquids, e.g. in CIP lines or other processes in the beverage industry. High accuracy and resistance against contamination of the electrode are achieved by using 4 electrode conductivity cells. The instrument can be operated directly and is user-friendly at the graphic display. The switching output can be freely programmed; the Condutec is available either as a compact unit or split version (for strong vibrations or significant heat radiations).
Hengesbach K Conductivity Transmitter Features:
- measurement/control of conductivity or concentration in liquids
- available as a compact unit or split version
- output for conductivity and temperature 4 – 20 ma
- measuring range programmable from 0… 500 ms/cm
- the sensor can be sterilized up to 140°, 1 H
- various process connections are available, e.g. hygienic design versions
Specification:
| General information | ||
| Device type/measuring principle | CONDUTEC / conductivity measurement | |
| Input | ||
| Measuring range | 0…500mS/cm | |
| Measuring rate | approx. 3/seconds | |
| Temperature sensor | Pt1000 acc. to DIN IEC 751 | |
| Temperature measuring range | -40…+160°C | |
| Conductivity output | ||
| Output signal | 2-wire: 4…20mA | |
| Cell constant | programmable in the range of 0,08…4,0 | |
| Standard error | ± 0,5% from measure value ± 2 digit | |
| Temperature coefficient | < 100ppm/°C | |
| Temperature compensation | linear programmable in range 0,0…8,0%/°C | |
| Temperature output | ||
| Output signal | 2-Leiter: 4…20mA | |
| Burden | RA=(UB-14V) / 0,02A | |
| Alarm output | ||
| Transistor | 2x transistor output, 14…30V DC, max. 60mA | |
| Voltage drop | < 2V | |
| Measuring range switching | ||
| Ri | > 10k? | |
| MB1 active | U=0…3V DC | |
| MB2 active | U=12…30V DC | |
| Conditions of use | ||
| Installation position | unsuitable for transom mounting; otherwise arbitrarily | |
| Medium temperature | -10…+120°C (short duration 140°C for max. 30 min) | |
| Environmental temperature | 0…+50°C | |
| Protection class EN60529 | IP 65 | |
| Electromagnetic compatibility | acc. to EN 50022, DIN IEC 61000-4-3/4/5 | |
| Construction | ||
| Electrical connection | – Standard: M20x1.5 cable screw connection | |
| – Optional: M12x1 round plug-in connector, nickel-plated brass | ||
| Process connection | – Clamp DIN 32676, DN25/DN32/DN40 | |
| – Tapered Union with grooved union nut DIN 11851, DN25 | ||
| – Tapered Union with grooved union nut DIN 11851, DN40 | ||
| – Conical coupling with grooved union nut DIN 11851, DN50 | ||
| – Conical coupling with grooved union nut DIN 11851, DN65 | ||
| – modular system PZM | ||
| – VARIVENT® Ø=50mm (F) | ||
| – VARIVENT® Ø=68mm (N) | ||
| Materials | – Housing: | Polyamide, PA6-GF/GK 15/15 |
| – Front cover display: | Polyester | |
| – Process connection/sensor: | PEEK, PVDF, CrNi Wkst. 1.4404, graphite, | |
| gasket EPM 80 – with FDA certification | ||
| Type | – Compact: | sensor and transmitter assembled as one unit |
| – Splitted: | sensor and transmitter separate; connected by 5m, 10m or 20m cable | |
| Display | – LCD-dot display, 3.8mm height, 2 lines with 16 characters | |
| – Display range conductivity: 500…9999 Digit | ||
| – Unit conductivity adjustable: µS/cm, mS/cm, k?/cm, M?/cm | ||
| – Unit temperature adjustable: °C, °F | ||
| Auxiliary energy | ||
| Supply voltage | 14…30V DC, 2-wire system | |
Featuresmeasurement / control of conductivity or concentration in liquids available as a compact unit or split version output for conductivity and temperature 4 – 20 measuring range programmable from 0… 500 ms/cm sensor can be sterilized up to 140°, 1 Various process connections are available, e.g. hygienic design versionsDescriptionThe conductivity transmitter Condutec is used for the measurement of conductivity or concentration in liquids, e.g. in CIP-lines or other processes in the beverage industry. High accuracy and resistance against contamination of the electrode are achieved by using 4 electrode conductivity cells. The instrument can be operated directly and is user-friendly at the graphic display. The switching output can be freely programmed; the Condutec is available either as a compact unit or split version (for strong vibrations or significant heat radiations).
Download Data Sheet: Conductivity Transmitter Condutec K
Ref: hengesbach.com
Other Article:
- Hengesbach Pressure and Level Transmitter PZM Series 050D
- Hengesbach PZM/VRM 200/201 Pressure and Level Transmitter
- Flush-Mounted Pressure Transmitter VRM050D Series Hengesbach
- Flush-Mounted Pressure Transmitter TCF050D Hengesbach
- Pressure and Level Transmitter Keramess KS 050D Series Hengesbach