Overview
Thanks to their design, the flush-mounted Hengesbach TPS Smalline pressure transmitters are suitable for pressure and level measurements with little dead space, even with crystallizing or viscous media. The Hengesbach TPS Smalline Pressure Transmitters in stainless steel housings are available in protection class IP 65 and can optionally be encapsulated. The electrical connection is made via a cable socket or alternatively via an M12 connector.
Hengesbach TPS Smalline pressure transmitters High-temperature versions in continuous operation up to 200 ° C are available. Vacuum resistance is given. The compact standard housing is made of stainless steel. Corresponding weld-in sleeves and application-specific process connections are available.
In addition to flush versions for sanitary and general industrial applications, versions with a pressure gauge connection and attached diaphragm seals are also available. The devices of the Hengesbach TPS Smalline pressure transmitters are suitable for many applications in the industrial sector due to the wide range of connection options.
Features:
- with internal and external measuring cell
- ideal for broadband industrial applications for process printing
- Measuring ranges from 0.35 bar to 30 bar, for relative and absolute pressure measurements
- Use of food and pharmaceutical compliant materials
- optional for high medium temperatures up to 200 ° C
Specification:
| General Information | ||||
| Manufacturer/ Device | Hengesbach / Pressure Transmitter TPS | |||
| Measuring Principle/ Device Type | TPS piezoresistive, For Pressure and Level Measurement | |||
| Entrance | ||||
| Measuring Range | TPS | |||
| Normal Size (bar) | Relative | ISN | Absolute | ISN |
| 0,35 bar | 1 | 0,35 bar | 1 | |
| 1 bar | 3 | 1 bar | 3 | |
| 2,5 bar | 8 | 2,5 bar | 8 | |
| 5 bar | 15 | 5 bar | 15 | |
| 10 bar | 30 | 10 bar | 30 | |
| 30 bar | 90 | 30 bar | 90 | |
| Setting Range | zero ± 10% (FS) | |||
| (Via Potentiometer) | span ± 20% (FS) | |||
| Overload Protection | -1 bar und 3-facher Messendwert, höhere ÜSI auf Anfrage | |||
| Burst Pressure | 10 times the full scale value depending on the device type and nominal measuring range | |||
| Output | ||||
| Output Signal | 4…20 mA, 2 wire Load: ? (VB – 12 V) /0,02 mA | |||
| Influence of the river | £ ± 0,15% max | |||
| Current Limitation | 25 mA typ., 32 mA max. | |||
| Integration Time | 0 … 20 sec. | |||
| Measurement Accuracy | ||||
| Reference Condition | DIN IEC 60770 | |||
| Linearity incl. Hysteresis and Repeatability and n.d Limit Point Method DIN IEC 770 | ? = 0,3% of the value of the nominal measuring. In the case of small absolute pressure measuring ranges, specifications for linearity are particularly necessary | |||
| Warm-up time | 1 sec. | |||
| Response Time (without damping) | 320 ms (mains frequency 50 Hz selected) or 266 ms (mains frequency 60 Hz selected) | |||
| Long Term Drift | £ 1% v. EW | |||
| Repeatability | £ 0,05 % v. EW | |||
| Hysteresis | £ 0,1% v. EW | |||
| Thermal Hysteresis | Zero Point and measuring span in the compensated temperature range 0…80°C. | |||
| ? ± 0,2% of EW / 10 K for nominal measuring range from 4 bar | ||||
| ? ± 0,3% of EW / 10 K for nominal measuring range 0,6 bar | ||||
| Nominal Position | > 1 bar any | |||
| Auxiliary Power | ||||
| Supply Voltage | 13-36 VDC, max. permissible residul ripple 1 V … | |||
| Supply Voltage Influence | ? ± 0,03%. Supply Voltage Change | |||
| Condition Of Use | ||||
| Medium Temperature | -35°C… + 125°C, 140°C max. für 1 h (Type HT für Temperaturen bis 200°C) | |||
| Ambient Temperature | -35°C… +85°C | |||
| Storage Temperature | -35°C… +85°C | |||
| Protection class acc. EN 60529 | – IP 65 (with connector according to EN 175301-803 up to A) | |||
| – IP 67 (with permanently attached reference cable) | ||||
| Electromagnetic compatibility | EMC guidelines according to EN 50081-2 / 50082-2 are fulfilled, CE mark | |||
| Constructive structure | ||||
| Design | Standard housing | |||
| material | Standard housing made of 1.4301 | |||
| Process connections made of 1.4404 | ||||
| Electrical connection | Standard: connector acc. EN 175301-803 type A | |||
| – optional: permanently connected reference cable, length 1m | ||||
| – optional: circular connector M12 x 1 | ||||
| Process connections | see dimensional drawings and ordering information | |||
| Filling liquid | Silicone oil (food safe) AK100 | |||
| Certificate | Declaration of conformity on request | |||
Ref: Hengesbach.com
Other Article:
- Hengesbach Pressure and Level Transmitter PZM Series 050D
- Hengesbach PZM/VRM 200/201 Pressure and Level Transmitter
- Flush-Mounted Pressure Transmitter VRM050D Series Hengesbach
- Flush-Mounted Pressure Transmitter TCF050D Hengesbach
- Pressure and Level Transmitter Keramess KS 050D Series Hengesbach