General Contrec 120A Level Monitor accepts a 4-20mA signal from a wide range of level sensors, including Pressure Transmitters, Ultrasonic Sensors or Capacitance Probes, and displays both level and tank contents on a large LCD display. The 120A is a high-accuracy Level Monitor designed to operate with analog level sensors. Having an IP67 weatherproof case, […]
Description Eska ERG-H5 Series Gas pressure regulator which is used on gas line to reduce inlet pressure to desired outlet pressure. ERG-H5 series pressure regulators are suitable for commercial usage like Gas Skids where the maximum inlet pressure up to 20 bar and outlet pressure up to 2,5 bar. It is mainly used in Distribution […]
Description Dwyer Flotect Series V10 Flow Switch is designed to provide an inexpensive, reliable unit to monitor the presence or absence of flow in a system. The V10 flow switch is used to monitor unattended equipment and protect it from costly damage. The V10 flow switch utilizes a rugged, hermetically sealed reed switch which is […]
Description BAMOSOFT Control Bamo Water Hardness Monitor monitors safely the quality of softened water. It emits a light alarm as soon as the hardness of the outlet water is near or above the threshold. (See the signaling table) Example: Raw water (tap water): hardness of 300 ppm CaCO? Threshold is set at 0.25 %: for […]
Description Bamo Water Hardness Monitor BAMOSOFT Smart safely the water quality produced by the softener. It alarms (LED and relay output) when the softened water hardness is 10% or over the hardness of raw water. BAMOSOFT Smart gives an alarm as well as brine (leakage) is detected at the softener outlet and if system integrity […]
Description Bamo LAS Resistivity Monitor indicates permanently the resistivity value. The alarm sounds each time the resistivity is lower than the preset value (to adjust on site). This alarm resets only when the resistivity is back to the correct value. The scale 0…2 M? is expanded to allow a comfortable reading from 20 to 500 […]