J Schneider AKKUTEC 2405Indonesia Industrial Parts

General Information

J Schneider AKKUTEC 2405, The battery buffered DC power supply of the series AKKUTEC is working according to the stand-by parallel mode and ensures in connection with a lead-acid accumulator a safe continuous DC power supply in case of mains failure. The backup time is depending on the state of charge of the accumulator and of the discharge current.

The power supply has the following features:

Battery charger with I/U-charging characteristics
Battery management by micro-controller
Battery voltage tracking of the charging voltage by external sensor module (optional)
USB interface: with corresponding drivers and Schneider TECControl Software the message contacts can be controlled and a Shut-Down/Restart can be made.

J. Schneider AKKUTEC 2405 Technical Data

Nominal input voltage	115 … 230 V AC
Input voltage range	98 – 264 V 115 V -15% 230 V +15%
Nominal frequency	47 … 63 Hz
nominal input current	1,4 A – 115 V AC 0,7 A – 230 V AC
output voltage without battery	26,8 V DC ±0,4%
output voltage with battery	19,8 V DC – 26,8 V DC
nominal output current	5 A DC
Charge end voltage with temp.-sensor @ 25°	27,0 V DC at 25°C
Charge end voltage without temp.-sensor	26,8 V DC ± 0,4%
Efficiency	88,0 %
Battery type	Pb-Akku, maintenance-free Pb- Akku maintenance-free (Option with changed characteristic)
Buffer time	Depending on battery and load
Degree of protection	IP 20
Operating temperature recommended for battery	0 … 45 °C 0… 25°C
Storage temperature	0… 50°C
Max. altitude (without derating)	1000 m above sea level
Dimensions (H x W x D)	160 mm x 75 mm x 150 mm
Weight	approximately 1,0 kg
Fixation	Snap-on mounting for DIN top hat rail or mounting bracket for mounting plate
Norms and Regulations	EN 50178 / EN60950
UL approvals	UL 508 C22.2