J. Schneider CAPTEC 2401Indonesia Industrial Parts

J. Schneider CAPTEC 2401 Capacitor Buffered Power Supply. The AC CAPTEC 2401 is a regulated power supply with integrated ultracapacitors and integrated line protection. In addition to the regulated supply of the load, the integrated ultra-capacitors will be charged within a few seconds under the main operation.

In the event of a power failure, the AC CAPTEC 2401 guarantees the uninterrupted and safe supply of the DC voltage according to the stored energy in the capacitors.

Peak current (pulsed) up to 10 A for 10 ms is possible with charged capacitors.

The AC CAPTEC 2401 has the following features:

Regulated power supply with protective separation
Wide range voltage input 80 – 264 V AC
Wide operating temperature -40°C up to +60°C
Maintenance-free thanks to long-life capacitors
Microcontroller-based charging and discharging of the ultra-capacitors
Operating and charge status monitoring via LEDs and signaling contacts

J. Schneider CAPTEC 2401 Technical Data

Input
Nominal input voltage	110 V AC / 230 V AC +15 % /-10 %
Frequency	50 / 60 Hz ±3 Hz
Nominal input current	0,2 A @ (Ue = 230 V DC, Ua = 24 V DC, Ia = 1 A)
Inrush current	25 A @ 115 V AC / 45 A @ 230 V AC
Nominal input power	28 W @ (Ue = 230 V DC, Ua = 24 V DC, Ia = 1 A)
output
Nominal output voltage	24 V DC
Output voltage in back-up operation	23,3 V DC ±2 %
Residual ripple	200 mV_pp
Nominal output current	1 A
Current limitation	See insruction Manual chapter 5
Energy (typical)	600 J (Ws) @ (Ua = 23,3 V DC, Ia = 1 A)
Power loss (self-consumptions)	3,3 W
Energy consumption in buffer operation	1 W
Short-cicuit proof	See insruction Manual chapter 5
fuse
Fuse input	2 A F
General
Protective system housing	IP20
Overvoltage degree	III
Degree of pollution	2
Dimensions (H x W x D)	91 mm x 106 mm x 62 mm
Weight	0,3 kg
Operational temperature / storage temperature Operational temperature UL prooved	-40 °C…+60 °C +10 °C…+60 °C
humidity	?90 no condensation
Max. height above sea level (without load reduction)	2000 m