Bamo Inductive TCL S50 Conductivity PEEK Probe

Bamo Inductive TCL S50 Conductivity PEEK Probe

Bamo Inductive TCL S50 Conductivity PEEK Probe is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo Inductive TCL S50 Inductive Conductivity

TCL S50 probe is well adapted for measurement between 10 µS/cm up to 2000 mS/cm. It uses inductive measurement that offers many advantages. There is a total galvanic insulation between measuring loop and the liquid for reliable measurements on numerous chemicals. PEEK material allows a wide range of chemical compatibilities and a long lifetime. Probe may also work at high temperature up to 125 °C.

Immersion measurement

The probe is fixed to end of probe holder for immersion, length from 500 to 2000 mm, with optional flange fitting.

On-line measurement:

Probe is mounted on a Te, ND 50 mm.

Complete measuring system includes:

  • Inductive probe TCL S50, cable output.
  • Fitting for: or immersion or on-line application.
  • Converter: factory calibrated.
  • Monitor BAMOPHAR TOR 364 (doc 364-04)

Monitors BAMOPHAR

BAMOPHAR 364 is designed for use of inductive probes.

Available ranges:

  • 0- 2 mS /cm
  • 0- 20 mS/cm
  • 0- 200 mS /cm
  • 0- 2000 mS /cm

Temperature compensation is done by BAMOPHAR, offering also an output 4-20mA, copy of temperature measurement. Factory calibrations are done on each measuring system for a quick and easy start up on site.

Bamo Inductive TCL S50 Features

  • Measuring range from 10 µS/cm up to 2000 mS/cm
  • Construction: PEEK
  • Wide chemical compatibility
  • Temperature max. 125 °C
  • Low fouling probe
  • Built-in Pt100 sensor

Application

TCL S50 probe is designed for applications where high chemical resistance or high operating temperature are necessary:

  • WWTP survey
  • Concentration monitoring of acid and base (e.g.: NaOH, HNO₃, H₂SO₄ …)
  • Quality survey of chemicals in tank or pipeline
  • Phase separation of mixture liquid/liquid

Another Article:

Specification

Measuring range Conductivity: 10 µS/cm up to 2000 mS/cm
Cell constant c = 1.98 cm⁻¹
Probe material PEEK
Seal FPM
Fitting 3/4” BSP
Ambient temperature –10 … +70 °C
Liquid temperature -20 … +125 °C
Temperature sensor Built-in Pt 100 sensor (Class A – acc. IEC 60751)
Pressure 20 bar max.
Protection IP 67 (NEMA 6)
IP 68 with immersion probe holder
Output cable version 5 m long cable

Download Data Sheet: Inductive Conductivity, PEEK Probe TCL S50

Ref; bamo.eu

Contact us : sales@wmablog.com or visit to our E-Commerce

Share