Description of Wenglor EK96VD8 Through Beam Sensor
The industrial setting is the ideal application for the Wenglor EK96VD8 through-beam sensor. The gadgets exhibit outstanding functional reliability in highly polluted situations because of their wide working range. The test input can be used to verify if the sensors are operating correctly. When the laser, red, or infrared light is interrupted by an item, the sensor switches.
Features at a Glance
- Miniature design
- Rugged design with full encapsulation
Electrical Data
- Sensor Type Receiver
- Supply Voltage 10 … 30 V DC
- Current Consumption (Ub = 24 V) < 20 mA
- Switching Frequency 500 Hz
- Response Time 1 ms
- Temperature Drift < 10 %
- Temperature Range -25 … 60 °C
- Switching Output Voltage Drop < 2.5 V
- PNP Switching Output/Switching Current 100 mA
- Residual Current Switching Output < 50 µA
- Short Circuit and Overload Protection yes
- Reverse Polarity Protection yes
- Protection Class III
Applications
05 = Switching Distance Adjuster
01 = Switching Status Indicator
01 = Switching Status Indicator
Specifications
Optical Data | |
|---|---|
| Range | 6,000 mm |
| Smallest Recognizable Part | 1 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 4 ° |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M8 × 1; 3-pin |
Output | |
|---|---|
| PNP NC | yes |
For More Information and Price: Wenglor EK96VD8 Through Beam Sensor
Read More Articles:
- Dropsa Ultrasensor 2 Proximity and microswitch systems
- O2 Analyzer Sensor with ZIRCONIA and INFRA-Red Sensor
- Shaw Moisture Meters – Dewpoint Meters, Hygrometers and Moisture Analysers
- Fischer Measuring and Control Technology
- Hach Controllers SI792 for Electrochemical Applications
You must be logged in to post a comment.